R.E. Dodde, Gee JS, Geiger JD, Shih AJ (2012) “Monopolar Electrosurgical Thermal Management for Minimizing Tissue Damage,” IEEE Transaction on Biomedical Engineering, Vol. 59, pp. 167-173.
B.L. Tai, A. Jessop, D.A. Stephenson, A.J. Shih (2012) “Workpiece Thermal Distortion in MQL Deep Hole Drilling” Finite Element Modeling and Experimental Validation,” ASME Journal of Manufacturing Science and Engineering, Vol. 134, pp. 011008-1-9.
J. Tao, J. Ni, and A.J. Shih (2012) “Modeling of the Anode Crater Formation in Electrical Discharge Machining,” ASME Journal of Manufacturing Science and Engineering, Vol. 134, pp. 011002-1-11.
J.Z. Moore, P.W. McLaughlin, A.J. Shih (2012) “Novel Needle Cutting Edge Geometry for End-Cut Biopsy,” Medical Physics, Vol. 39, pp. 99-108.
2011
M.Fujiki, G.Y. Kim, J. Ni, A.J. Shih (2011) “Gap Control for Near-Dry EDM Milling with Lead Angle, International Journal of Machine Tools and Manufacture, Vol.51,pp.77-83.
G.H. Kruger, A.J. Shih, D.G. Hattingh, T.I. van Niekerk (2011) “Design, Implementation and Experimental Analysis of Intelligent Agent Architecture for Manufacturing Process Optimization,” Journal of Advanced Engineering Informatics, 25(4), 783-796.
G.H. Kruger, C. Chen, J.M. Blum, A.J. Shih, K.K. Tremper (2011) “Reactive Agent and Visualization System for Anesthesia Support in the Operating Room,” Journal of Systemics, Cybernetics and Informatics, 9(5), 30-37.
B.L. Tai, J.M. Dasch, A.J. Shih (2011) “Evaluation of Lubricant for Minimum Quantity Lubrication Machining,” Machining Science and Technology, Vol. 15, pp. 376-391.
D.D. Johnson, A.E. Kirkpatrick, A.J. Shih, J.A. Ashton-Miller (2011) “The Effect of Lead Use on Back and Shoulder Postural Muscle Activity in Healthy Young Adults,” Human Factors, Vol. 53, pp. 729-739.
S.F. Miller, S. Arul, G.H. Kruger, T.Y. Pan, A.J. Shih (2011) “Effect of Localized Metal Matrix Composite Formation on Spot Friction Welding Joint Strength,” ASME Journal Engineering Material and Technology, Vol. 133, pp. 031099-1-8.
M. Fujiki, J. Ni, A.J. Shih (2011) “Tool Path Planning for Near-Dry EDM Milling with Lead Angle on Curved Surfaces,” ASME Journal of Manufacturing Science and Engineering, Vol. 133, pp. 051005-1-9.
C.S. McGill, J.A. Schwartz, J.Z. Moore, P.W. McLaughlin, A.J. Shih (2011) “Precision grid and hand motion for accurate needle insertion in brachytherapy,” Medical Physics, Vol. 38, No. 8, pp. 4749-4759.
B. Shen, A.J. Shih, G. Xiao (2011) “Study of Convection Heat Transfer in Grinding Using Finite Difference Method,” ASME Journal of Manufacturing Science and Engineering, Vol. 133, pp. 031001
S.B. White, A.J. Shih, K.P. Pipe (2011) “Boiling Surface Enhancement by Electrophoretic Deposition of Particles from a Nanofluid,” International Journal of Heat and Mass Transfer, Vol. 54, 4370?4375.
J.Z. Moore, K. Malukhin, A. J. Shih, K. F. Ehmann (2011) “Hollow Needle Tissue Insertion Force Model,” CIRP Annals – Manufacturing Technology, Vol. 60, 157-160.
S.B. White, A.J. Shih, K.P. Pipe (2011) “Investigation of the Electrical Conductivity of Propylene Glycol Based ZnO Nanofluids,” Nanoscale Research Letters, Vol. 6, 346, 1-5.
B.L. Tai, D.A. Stephenson, A.J. Shih (2011) “Improvement of Flatness in Face Milling Based on 3-D Holographic Laser Metrology” International Journal of Machine Tool and Manufacture, Vol. 51, pp. 483-490.
B.L. Tai, D.A. Stephenson, S.B. White, A.J. Shih (2011) “High Air Pressure in MQL Deep Hole Drilling Workpiece Temperature,” Advanced Materials Research, Vols. 189-193, pp 1732-1736.
2010
J.Z. Moore, Q. Zhang, C.S. McGill, P.W. McLaughlin, H. Zheng, A.J. Shih (2010) “Cutting Edge Rake and Inclination Angles Modeling for Plane Needles,” ASME Journal of Manufacturing Science and Engineering, Vol. 132, pp. 051005-1-8.
S.B. White, A.J. Shih, K.P. Pipe (2010) “Improved Boiling Performance of a Surface Due to Particle Layering During Nanofluid Boiling,” Journal of Applied Physics, Vol. 107, p. 114302.
J. Z. Moore, A.J. Shih (2010) “Tissue Oblique Cutting Flow Angle and Needle Insertion Contact Length,” Transactions of NAMRI/SME, Vol. 38, pp. 711-718.
P. Kalita, A. Malshe, W. Jiang, A. J. Shih (2010) “Tribological Study of Nanolubricant Integrated Soybean Oil for Minimum Quantity Lubrication (MQL) Grinding,” Transactions of NAMRI/SME, Vol. 38, pp. 137-144.
2009
R.E. Dodde, A. Advincular, A.J. Shih (2009) “A Novel Technique for Demonstrating the Real-Time Sub-Surface Tissue Thermal Profile of Two Energized Surgical Instruments,” Journal of Minimally Invasive Gynecology, Vol. 16, pp. 599-603.
Y. Y. Zhou, G. S. Lin, A. J. Shih, S. J. Hu (2009) “Multi-Physics Modeling of Assembly Pressure Effects on PEM Fuel Cell Performance,” ASME Journal of Fuel Cell Science and Technology, Vol. 6, pp. 041005-1-7.
Y. Y. Zhou, A. J. Shih, S. J. Hu (2009) “Assembly Pressure and Membrane Swelling in PEM Fuel Cells,” Journal of Power Sources, Vol. 192, pp. 544-551.
B. Shen and A.J. Shih (2009) “Minimum Quantity Lubrication (MQL) Grinding Using Vitrified CBN Wheels,” Transactions of NAMRI/SME., Vol. 37, pp. 129-136.
J.Z. Moore, C.S. McGill, P.W. McLaughlin, Q. Zhang, H. Zheng, and A.J. Shih (2009) “Blade Oblique Cutting of Tissue for Investigation of Biopsy Needle Insertion,” Transactions of NAMRI/SME, Vol. 37, pp. 49-56.
M. Fujiki, J. Ni, and A. J. Shih (2009) “Investigation of the Effects of Electrode Orientation and Fluid Flow in Near-Dry EDM Milling,” International Journal of Machine Tool and Manufacture, Vol. 49, pp. 749-758.
D. Mei, T. Kong, A. J. Shih, Z. Chen (2009) “Magnetorheological Fluid Controlled Boring Bar for Chatter Suppression,” Journal of Materials Processing Technology, Vol. 209, pp. 1861-1870.
2008
C. C. Kao, A. J. Shih (2008) “Design and Tuning of the Adaptive Fuzzy Logic Controller for Micro-Hole Electrical Discharge Machining,” Journal of Manufacturing Processes, Vol. 10, pp. 61-73
B. Shen, G. Xiao, C. Guo, S. Malkin, A. J. Shih (2008) “Thermocouple Fixturing Method for Grinding Temperature Measurement,” ASME Journal of Manufacturing Science and Engineering, Vol. 130, pp. 051014-1-8.
C. C. Kao, A. J. Shih, S. F. Miller (2008) “Fuzzy Logic Control of Micro-Hole Electrical Discharge Machining,” ASME Journal of Manufacturing Science and Engineering, Vol. 130, pp. 064502-1-6.
J. Zhu, J. Ni, A. J. Shih (2008) “Robust Machine Tool Thermal Error Modeling through Thermal Modal Analysis,” ASME Journal of Manufacturing Science and Engineering, Vol. 130, pp. 061006-1-9.
S. Arul, G. H. Kruger, S. F. Miller, P. K. Mallick, T. Y. Pan, A. J. Shih (2008) “An Experimental Study of Joint Performance in Spot Friction Welding of 6111-T4 Aluminum Alloy,” Science and Technology of Welding and Joining, Vol. 13, pp. 629-637.
B. Shen, A. J. Shih, S. Tung (2008) “Application of Nanofluids in Minimum Quantity Lubrication Grinding,” STLE Tribology Transactions, Vol. 130, pp. 730-737.[selected as the highlight article for the Tribology & Lubrication Technology, a STLE monthly magazine]
Z. Huang, A. J. Shih, J. Ni (2008) “Quantitative Evaluation of Powder Spray Effects on Stereovision Measurements,” Measurement Science and Technology, Vol. 19, Feb. pp. 025502-1-11.
B. Shen, P. Kalita, A. P. Malshe, A. J. Shih (2008) “Performance and Behavior of Novel MoS2 Nanoparticles based Grinding Fluids in Minimum Quantity Lubrication Grinding,” Transactions of NAMRI/SME, Vol. 36, pp. 357-364.
E. C. Johnson, R. Li, A. J. Shih, H. Hanna (2008) “Design of Experiment Based Force Modeling of the Face Grinding Process,” Transactions of NAMRI/SME, Vol. 36, pp. 241-248.
J.H. Chang, H. Hocheng, H.Y. Chang, and A.J. Shih (2008) “Metal Removal Rate of Thiobacillus Thiooxidans without Pre-secreted Metabolite,” Journal of Materials Processing Technology, Vol. 201/1-3, pp. 560-564.
R. E. Dodde, S. F. Miller, J. D. Geiger, A. J. Shih (2008) “Thermal-Electric Finite Element Analysis and Experimental Validation of Bipolar Electrosurgical Cautery,” ASME Journal of Manufacturing Science and Engineering, Vol. 130, pp. 021015-1-8.
A. J. Shih (2008) “Biomedical Manufacturing – A New Frontier of Manufacturing Research,” ASME Journal of Manufacturing Science and Engineering, Vol. 130, pp. 021009-1-8.
J. Tao, A.J. Shih, J. Ni (2008) “Experimental Study of the Dry and Near-Dry Electrical Discharge Milling Processes,” ASME Journal of Manufacturing Science and Engineering, Vol. 130, pp. 011002-1-9.
J. Tao, A.J. Shih, J. Ni (2008) “Near-Dry EDM Milling of Mirror-Like Surface Finish,” International Journal of Electrical Machining, No. 13, pp. 29-34.
J. Z. Moore, R. J. Somoza, A. J. Shih, Z. Filipi, A. J. Moskalik, N. M. Johnson (2008) “Characterization of the Fluid Deaeration Device for a Hydraulic Hybrid Vehicle System,” SAE Transactions, Paper #2008-01-0308.
Z. Parlar, M. Bakkal, A. J. Shih (2008) “Sliding Tribological Characteristics of Zr-based Bulk Metallic Glass,” Intermetallics, Vol. 16, pp. 34-41.
R. Li, L. Riester, T. R. Watkins, P. J. Blau, A. J. Shih (2008) “Metallurgical Analysis and Nanoindentation Characterization of Ti-6Al-4V Workpiece and Chips in High Throughput Drilling,” Materials Science and Engineering: A, Vol. 472, pp. 115-124.
2007
C. C. Kao, A. J. Shih (2007) “Form Measurements of Micro-Holes,” Measurement Science and Technology, Vol. 18, pp. 3603-3611.
C. C. Kao, J. Tao, A. J. Shih (2007) “Near Dry Electrical Discharge Machining,” International Journal of Machine Tools and Manufacture, Vol. 47, pp. 2273-2281.
R. Li, A. J. Shih (2007) “Tool Temperature in Titanium Drilling,” ASME Journal of Manufacturing Science and Engineering, Vol. 129, pp. 740-749.
S. F. Miller, A. J. Shih (2007) “Thermo-Mechanical Finite Element Modeling of the Friction Drilling Process,” ASME Journal of Manufacturing Science and Engineering, Vol. 129, pp. 531-538.
R. Li, A. J. Shih (2007) “Spiral Point Drill Temperature and Stress in High-Throughput Drilling of Titanium,” International Journal of Machine Tools and Manufacture, Vol. 47, pp. 2005-2017.
R. Li, A. J. Shih (2007) “Finite Element Modeling of High-Throughput Drilling of Ti-6Al-4V,” Transactions of NAMRI/SME, Vol. 35, pp. 73-80.
M. W. Chastagner, A. J. Shih (2007) “Abrasive Jet Machining for Edge Generation,” Transactions of NAMRI/SME, Vol. 35, pp. 359-366.
C.-H. Huang, L.-C. Jan, R. Li, A. J. Shih (2007) “A Three-Dimensional Inverse Problem in Estimating the Applied Heat Flux of a Titanium Drilling — Theoretical and Experimental Studies,” International Journal of Heat and Mass Transfer, Vol. 50, pp. 3265-3277.
S.G. Arul, T. Pan, W.J. Schwartz, A. J. Shih, P.K. Malick, S. F. Miller (2007) “Effects of Surface Treatment (Lubricant) on Spot Friction Welded Joints Made of 6111-T4 Aluminum Sheets,” SAE Transactions, SAE 2007-01-1706.
S.F. Miller, P.J. Blau, A.J. Shih (2007) “Tool Wear in Friction Drilling,” International Journal of Machine Tools and Manufacture, Vol. 47, pp. 1636-1645.
D. J. Johnson, R. Warner, A. J. Shih (2007) “Surface Roughness and Material Removal Rate in Machining Using Microorganisms,” ASME Journal of Manufacturing Science and Engineering, Vol. 129, pp. 223-227.
Y. Y. Zhou, G. S. Lin, A. J. Shih, S. J. Hu (2007) “A Micro-scale Model for Predicting Contact Resistance between Bipolar Plate and Gas Diffusion Layer in PEM Fuel Cells,” Journal of Power Sources, Vol. 163, pp. 777-783.
R. Li, P. Hegde, A. J. Shih (2007) “High Throughput Drilling of Titanium Alloys,” International Journal of Machine Tools and Manufacture, Vol. 47, pp. 63-74.
2006
Z. Huang, A. J. Shih, J. Ni (2006) “Laser Interferometry Hologram Registration for Three-Dimensional Precision Measurements,” ASME Journal of Manufacturing Science and Engineering, Vol. 128, pp. 1006-1013.
A.J. Shih, Z. Huang (2006) “Three Dimensional Optical Measurements of Porous Foams,” ASME Journal of Manufacturing Science and Engineering, Vol. 128, pp. 951-959.
Z. Huang, A. J. Shih, J. Ni (2006) “Phase Unwrapping for Large Depth-of-Field 3D Laser Holographic Interferometry Measurement of Laterally Discontinuous Surfaces,” Measurement Science and Technology, Vol. 17, pp. 3110-3119.
C.C. Kao, A.J. Shih (2006) “Sub-nanosecond Monitoring of Micro-Hole Electrical Discharge Machining Pulses and Modeling of Discharge Ringing,” International Journal of Machine Tools and Manufacture, Vol. 46, pp. 1996-2008.
E.J. Cookson, D.E. Floyd, A.J. Shih (2006) “Design and Analysis of Metal Foam Electrical Resistance Heater,” International Journal of Mechanical Sciences, Vol. 48, pp. 1314-1322.
S.F. Miller, R. Li, H. Wang, A.J. Shih (2006) “Experimental and Numerical Analysis of the Friction Drilling Process,” ASME Journal of Manufacturing Science and Engineering, Vol. 128, pp. 802-810.
S.F. Miller, J. Tao, A.J. Shih (2006) “Friction Drilling of Cast Metals,” International Journal of Machine Tools and Manufacture, Vol. 46, pp. 1526-1535.
R.K. Guduru, K.A. Darling, R.O. Scattergood, C.C. Koch, K.L. Murty, M. Bakkal, A.J. Shih (2006) “Mechanical Properties of a Bulk Metallic Glass Obtained Using Shear Punch Tests,” Intermetallics, Vol. 14, 1411-1416.
C.C. Kao, J. Tao, S. Lee, A.J. Shih (2006) “Dry Wire Electrical Discharge Machining of Thin Workpiece,” Transactions of NAMRI/SME, Vol. 34, pp. 253-260.
R. Li, A.J. Shih (2006) “Finite Element Modeling of 3D Turning of Titanium,” International Journal of Advanced Manufacturing Technology, Vol. 29, pp. 253-261.
L.M. Xu, B. Shen, A. J. Shih (2006) “Vitreous Bond Silicon Carbide Wheel for Grinding of Silicon Nitride,” International Journal of Machine Tools and Manufacture, Vol. 46, pp. 631-639.
2005
J. Luo, H. Ding, A.J. Shih (2005) “Induction-Heated Tool Machining of Elastomers – Part I: Finite Difference Thermal Modeling and Experimental Validation,” Machining Science and Technology, Vol. 9, pp. 547-565.
J. Luo, H. Ding, A.J. Shih (2005) “Induction-Heated Tool Machining of Elastomers – Part II: Chip Morphology, Cutting Forces, and Machined Surfaces,” Machining Science and Technology, Vol. 9, pp. 567-588.
S.F. Miller, P.J. Blau, A.J. Shih (2005) “Microstructural Alterations Associated with Friction Drilling of Steel, Aluminum, and Titanium,” Journal of Materials Engineering and Performance, Vol. 14, pp. 647-653.
S.F. Miller, J. Qu, C.C. Kao, A.J. Shih (2005) “Investigation of Wire Electrical Discharge Machining of Thin Cross-Sections and Compliant Mechanisms,” International Journal of Machine Tools and Manufacture, Vol. 45, pp. 1717-1725.
J. Qu, A. J. Shih, R.O. Scattergood, J. Luo (2005) “Abrasive Micro-Blasting of Surface Layers of Electrical Discharge Machined WC-Co Composite,” Journal of Materials Processing Technology, Vol. 166, pp. 440-448.
R. L. Lemaster, A. J. Shih, Z. Yu (2005) “Blasting and Erosion Wear of Wood using Sodium Bicarbonate and Plastic Media,” Forest Products Journal, Vol. 55, pp. 59-64.
J. Luo, A. J. Shih (2005) “Inverse Heat Transfer Solution of the Induction Heat Flux,” ASME Journal of Manufacturing Science and Engineering, Vol. 127, pp. 555-563.
J. Kong, M. Hendrichsen, A. J. Shih (2005) “Infrared Thermometry Measurement of Temperature Distribution in Microwave Regeneration of Diesel Particulate Filters,” International Journal of Engine Research, Vol. 6, pp. 61-71.
M. Bakkal, S.B. McSapdden, A.J. Shih, R.O. Scattergood (2005) “Light Emission, Chip Morphology, and Burr Formation in Drilling the Bulk Metallic Glass,” International Journal of Machine Tools and Manufacture, Vol. 45, pp. 741-752.
M. Bakkal, S.B. McSapdden, A.J. Shih, R.O. Scattergood (2005) “Thrust Force, Torque, and Tool Wear in Drilling the Bulk Metallic Glass,” International Journal of Machine Tools and Manufacture, Vol. 45, pp. 863-872.
2004
C. W. Hardin, A. J. Shih, R. L. Lemaster (2004) “Diamond Wire Machining of Wood,” Forest Products Journal, Vol. 54, pp. 50-55.
A. J. Shih, R. C. McCall (2004) “Wear and Kinematics of Tool Blades for Scrap Tire Shredding,” Machining Science and Technology, Vol. 8, pp 193-210.
M. Bakkal, A. J. Shih, R. O. Scattergood (2004) “Chip Formation, Cutting Forces, and Tool Wear in Turning of Zr-Based Bulk Metallic Glass,” International Journal of Machine Tools and Manufacture, Vol. 44, pp. 915-925.
C. W. Hardin, J. Qu, A. J. Shih (2004)“Fixed Abrasive Diamond Wire Saw Slicing of Single Crystal SiC Wafers,” Materials and Manufacturing Processes, Vol. 19, pp. 355-367.
J. Kong, A. J. Shih (2004) “Infrared thermometry for diesel exhaust aftertreatment filter temperature measurement,” SAE Transactions, SAE 2004-01-0962.
J. S. Strenkowski, C. C. Hsieh, A. J. Shih (2004) “An Analytical Finite Element Technique for Predicting Thrust Force and Torque in Drilling,” International Journal of Machine Tools and Manufacture, Vol. 44, pp. 1413-1421.
A. J. Shih, M. A. Lewis, J. S. Strenkowski (2004) “End Milling of Elastomers – Fixture Design and Tool Effectiveness for Material Removal,” ASME Journal of Manufacturing Science and Engineering, Vol. 126, pp. 115-123.
A. J. Shih, M. A. Lewis, J. Luo, J. S. Strenkowski (2004) “Chip Morphology and Forces in End Milling of Elastomers,” ASME Journal of Manufacturing Science and Engineering, Vol. 126, pp. 124-130.
S. F. Miller, A. J. Shih, J. Qu (2004) “Investigation of the Spark Cycle on Material Removal Rate in Wire Electrical Discharge Machining,” International Journal of Machine Tools and Manufacture, Vol. 44, pp. 391-400.
M. Bakkal, A. J. Shih, R. O. Scattergood, C. T. Liu (2004) “Machining of a Zr-Ti-Al-Cu-Ni Metallic Glass,” Scripta Materialia,Vol. 50, pp. 583-588.
M. Bakkal, C. T. Liu, T. Watkins, R. O. Scattergood, A. J. Shih (2004) “Oxidation and Crystallization of Zr-Based Bulk Metallic Glass due to Machining,” Intermetallics, Vol. 12, pp. 195-204.
2003
J. Qu and A. J. Shih (2003) “Analytical Surface Roughness Parameters of an Ideal Profile Consisting of Elliptical or Circular Arcs,Machining Science and Engineering, Vol. 7, pp. 281-294.
A. J. Shih, A. C. Curry, R. O. Scattergood, T. M. Yonushonis, D. J. Gust, M. B. Grant, S. B. McSpadden, T. Watkins (2003) “Grinding of Zirconia using the Dense Vitreous Bond Silicon Carbide Wheel,?ASME Journal of Manufacturing Science and Engineering, Vol. 125, pp. 297-303.
A. C. Curry, A.J. Shih, R. O. Scattergood, J. Kong, and S.B. McSpadden (2003) “Grinding Temperature Measurements in MgO PSZ Using Infrared Spectrometry, J. Am. Ceram. Soc., Vol. 86, pp. 333-341.
B. J. Boothe, A. J. Shih, J. Kong, W. L. Roberts (2003) “Goniometric Characteristics of Optical Fibers for Temperature Measurement in Diesel Engine Exhaust Filters,?Measurement Science and Technology, Vol. 14, pp. 563-572.
J. Qu, L. Reister, A. J. Shih, R. O. Scattergood, E. Lara-Curzio (2003) “Nanoindentation Characterization of Surface Layers of Electrical Discharge Machined WC-Co, Materials Science and Engineering: A, Vol. A344, pp. 125-131.
M. G. Garrell, B. M. Ma, A. J. Shih, E. Lara-Curzio, and R. O. Scattergood (2003) “Mechanical Properties of PPS Bonded Nd-Fe-B Permanent Magnets,?Materials Science and Engineering: A, Vol. 359, pp. 375-383.
M. G. Garrell, A. J. Shih, B. M. Ma, E. Lara-Curzio, R. O. Scattergood (2003) “Mechanical Properties of Nylon Bonded Nd-Fe-B Permanent Magnets, Journal of Magnetism and Magnetic Materials, Vol. 257, pp. 32-43.
M. G. Garrell, A. J. Shih, E. Lara-Curzio, and R. O. Scattergood (2003) “Finite-Element Analysis of Stress-Concentration in ASTM D638 Tensile Test Specimens,?Journal of Testing and Evaluation, Vol. 31, pp. 52-57.
W. I. Clark, A. J. Shih, C. W. Hardin, R. L.Lemaster, S. B. McSpadden (2003) “Fixed Abrasive Diamond Wire Machining Part I: Process Monitoring and Wire Geometry and Tension, International Journal of Machine Tools and Manufacture, Vol. 43, pp. 523-532.
W. I. Clark, A. J. Shih, R.L.Lemaster, S. B. McSpadden (2003) “Fixed Abrasive Diamond Wire Machining ?Part II: Experiment Design and Results,?International Journal of Machine Tools and Manufacture, Vol. 43, pp. 533-542.
2002
B. K. Rhoney, A. J. Shih, R. O. Scattergood, J. L. Akemon, D. J. Gust, and M. B. Grant (2002) “Cylindrical Wire Electrical Discharge Machining of Metal Bond Diamond Wheels for Ceramic Grinding, International Journal of Machine Tool and Manufacture, Vol. 42, pp. 1355-1362.
J. Qu, A. J. Shih, and R. O. Scattergood (2002) “Development of the Cylindrical Wire Electrical Discharge Machining Process: Part I: Concept, Design, and Material Removal Rate, ASME Journal of Manufacturing Science and Engineering, Vol. 124, No. 3, pp. 702-707.
J. Qu, A. J. Shih, and R. O. Scattergood (2002) “Development of the Cylindrical Wire Electrical Discharge Machining Process: Part II: Surface Integrity and Roundness, ASME Journal of Manufacturing Science and Engineering, Vol. 124, No. 3, pp. 708-714.
B. K. Rhoney, A. J. Shih, R. O. Scattergood, R. Ott, and S.B. McSpadden (2002) “Wear Mechanism of Metal Bond Diamond Wheels Trued by Wire Electrical Discharge Machining, Wear, Vol. 252, pp. 644-653.
J. S. Strenkowski, A. J. Shih, and J. C. Lin (2002) “An Analytical Finite Element Model for Predicting Three-Dimensional Tool Forces and Chip Flow, International Journal of Machine Tools and Manufacture, Vol. 42, pp. 723-731.
A. J. Shih and H. S. Yan (2002) “Synthesis of a Single-Loop, Overconstrained Spatial 6R Mechanism for Two-Position Cylindrical Rigid Body Guidance, Mechanism and Machine Theory, Vol. 37, No. 2, pp. 61-73.
2001
A. J. Shih and J. L. Akemon (2001) “Wear of the Blade Diamond Tools in Truing Vitreous Bond Grinding Wheels. Part I Wear Measurement and Results, Wear, Vol. 250, pp. 587-592.
A. J. Shih, W. I. Clark, and J. L. Akemon (2001) “Wear of the Blade Diamond Tools in Truing Vitreous Bond Grinding Wheels. Part II Truing and Grinding Forces and Wear Mechanism,?Wear, Vol. 250, pp. 593-603.
A. J. Shih (2001) “A New Regulating Wheel Truing Method for Through-Feed Centerless Grinding, ASME Journal of Manufacturing Science and Engineering, Vol. 123, No. 2, pp. 319-324.
2000
A.J. Shih (2000) “An Experimental Investigation of Rotary Truing and Dressing of Vitreous Bond Wheels for Ceramic Grinding, International Journal of Machine Tools and Manufacture, Vol. 40, pp. 1755-1774.
A.J. Shih, M.B. Grant, T.M. Yonushonis, T.O. Morris and S.B. McSpadden (2000) “High speed and High Material Removal Rate Grinding of Ceramics Using the Vitreous Bond CBN wheel, Machining Science and Technology, Vol. 4, No. 1, pp. 43-58.
1999
Tricard, D.J. Gust and A.J. Shih (1999) “Precision Thru-feed Centerless Grinding of Zirconia, Machining Science and Technology, Vol. 3, No. 2, pp. 201-219.
A.J. Shih and N.L. Lee (1999) “Precision Cylindrical Face Grinding, Precision Engineering, Vol. 23, No. 3, pp. 177-184.
1998
J.F. Tu, M. Corless, M.J. Gehrich and A.J. Shih (1998) “Experimental Study of a Precision Hydrodynamic Wheel Spindle for Submicron Cylindrical Grinding, Precision Engineering, Vol. 22, No. 1, pp. 43-57.
A.J. Shih (1998) “Rotary Truing of the Vitreous Bond Diamond Grinding Wheels using Metal Bond Diamond Disks, Machining Science and Technology, Vol. 2, pp. 13-28.
A.J. Shih, T.M Yonushonis, M.B. Grant, T.O. Morris and S.B. McSpadden (1998) “Vitreous Bond CBN Wheel for High Speed Grinding of Ceramic and M2 Steel, Transaction of 26th NAMRC, pp. 195-200.
1996
A.J. Shih (1996) Finite Element Analysis of Orthogonal Metal Cutting Mechanics, International Journal of Machine Tools and Manufacture, Vol. 36, No. 2, pp. 255-273.
A.J. Shih (1996) Finite Element Analysis of the Rake Angle Effects in Orthogonal Metal Cutting, International Journal of Mechanical Sciences, Vol. 38, pp. 1-17.
1995
A.J. Shih (1995) Finite Element Simulation of Orthogonal Metal Cutting, ASME Journal of Engineering for Industry, Vol. 117, pp. 84-93.
1993
A.J. Shih (1993) Kinematics of Cycloidal Rotary Internal Combustion Engine Mechanism, ASME Journal of Mechanical Design, Dec. Vol. 115, pp. 953-959.
A.J. Shih (1993) Comparison and Analysis of the Epicycloidal and Hypocycloidal Rotary Engine Mechanism, ASME Journal of Mechanical Design, Dec., Vol. 115, pp. 960-966.
A.J. Shih and H.T. Yang (1993) Experimental and Finite Element Predictions of Residual Stresses due to Orthogonal Metal Cutting, International Journal for Numerical Method in Engineering, Vol. 36, pp. 1487-1507.
1992
C. Kao and A.J. Shih (1992) A Radial Method for Mechanism Optimal Design, Engineering Optimization, Vol. 20, pp. 179-186.
1991
A.J. Shih and H.T. Yang (1991) Experimental and Finite Element Simulation Methods for Rate-Dependent Metal Forming Processes, International Journal for Numerical Method in Engineering, Vol. 31, pp. 345-367.
1989
H.T. Yang, M. Heinstein and A.J. Shih (1989) Adaptive 2D Finite Element Simulation of Metal Forming Processes, International Journal for Numerical Methods in Engineering, Vol. 28, pp. 1409-1428.
1987
W. M. Hwang and A.J. Shih (1987) Optimal Synthesis of Suspension Mechanism with Variable Leverage Ratio, Journal of the Chinese Society of Mechanical Engineers, Vol. 8, pp. 43-50.
1986
W. M. Hwang and A.J. Shih (1986) A Design for Automatic Machining of the Die for Self-Tapping Screw, Journal of the Chinese Society of Mechanical Engineers, Vol. 7, pp. 109-113.
