Conference Publications

Refereed Conference Papers:

  • B.L. Tai, D.A. Stephenson, S.B. White, A.J. Shih (2011) “High Air Pressure in MQL Deep Hole Drilling Workpiece Temperature,” 2nd International Conference on Manufacturing Science and Engineering (ICMSE 2011), Guilin, China, April 9-11. 
  • M. Davis, B. Kovacic, J. Marini, A.J. Shih, K. Kozloff (2011) “Increased Susceptibility to Microdamage in Brtl/+ Mouse Model for Osteogenesis Imperfecta,” Orthopatic Research Society 2011 Annual Meeting, Long Beach, California, January 13-16, 2011.
  • B. Kovacic, J. Marini, A.J. Shih, K. Kozloff (2011) “Development of Anatomic Models to Assess Fracture Toughness of Mouse and Rat Bone,” Orthopedic Research Society 2011 Annual Meeting, Long Beach, California, January 13-16, 2011.
  • B.L. Tai, D.A. Stephenson, A. J. Shih (2010), “An Inverse Heat Transfer Method for Determining Workpiece Temperature in MQL Deep Hole Drilling,” 2010 ASME Manufacturing Science and Engineering Conference (MSEC), Oct 12-15, 2010, Erie, PA.
  • D. Gao, C. S. McGill, J. Z. Moore, H. Zheng, P.W. McLaughlin, Q. Zhang, S. Li, A.J. Shih(2010) “Study on Needle Deflection and Insertion Force during Needle Insertion,” Proceedings of the 9th International Conference on Frontiers of Design and Manufacturing, July 17-19, 2010, Changsha, China. 
  • B.L. Tai, J.M. Dasch, A. J. Shih (2010) Evaluation of Lubricants for Minimum Quantity Lubrication, 2010 STLE Annual Meeting & Exhibition, Bally’s Las Vegas Hotel and Casino, May 16-20, 2010, Las Vegas, Nevada.
  • C. Chen, G.H. Kruger, J.M., Blum, A.J. Shih, K.K. Tremper (2010) “Reactive Agent and Visualization System for Anesthesia Support in the Operating Room,” International Conference on Engineering and Meta-Engineering: ICEME 2010, Orlando, Florida, April 6-9, 2010. 
  • Y. Zhou, G. Lin, A.J. Shih, S. J. Hu (2009) “Assembly and Performance Modeling of Proton Exchange Membrane Fuel Cells,” Proceedings of the 2009 International Manufacturing Science and Engineering Conference, Oct. 4-7, 2009, West Lafayette, IN. 
  • B.L. Tai, D.A. Stephenson, A.J. Shih (2009) “Improvement of Surface Flatness in Face Milling by Varying the Tool Cutting Depth and Feed Rate,” Proceedings of the 2009 International Manufacturing Science and Engineering Conference, Oct. 4-7, 2009, West Lafayette, IN. 
  • B.L. Tai, J. M. Dasch, A. J. Shih (2009) “Evaluation of Lubricants for Minimum Quantity Lubrication (MQL) Machining,” Proceedings of the 2009 International Manufacturing Science and Engineering Conference, Oct. 4-7, 2009, West Lafayette, IN.  (presentation only due to GM’s refusal to sign the ASME copyright agreement)
  • S.G. Arul, G.H. Kruger, S.F. Miller, T.Y. Pan, A.J. Shih (2009) “Spot Friction Welding Joint Strength Improvement Using Localized Metal Matrix Ceramic Composite Formation,” Proceedings of the 2009 International Manufacturing Science and Engineering Conference, Oct. 4-7, 2009, West Lafayette, IN. 
  • J. Z. Moore, Q. Zhang, C. S. McGill, H. Zheng, P. W. McLaughlin, A. J. Shih (2009) “Modeling for Plane and Curved Needle Tip Cutting Edge Geometry,” 7th International Conference on Manufacturing Research (ICMR09), University of Warwick, UK, September 8-10, 2009.
  • J. Z. Moore, Q. Zhang, C. S. McGill, H. Zheng, P. W. McLaughlin, A. J. Shih (2009) “Needle Cutting Edge Modeling for Tissue Machining,” 12th CIRP Conference on Modelling of Machining Operations, San Sebastian, Spain, May 7-8, 2009. 
  • P. Kalita, K. Carlson, B. Shen, A. J. Shih, A. P. Malshe (2008) “Exploring Performance of Novel MoS2 Nanoparticles for MQL Grinding Through Tribological Measurements,” 2nd International & 23rd All India Manufacturing Technology, Design and Research Conference, India Institute of Technology, Madras, Chennai, December 15-17, 2008.
  • J. Tao, J. Ni, and A.J. Shih (2008) “Dry and Near-Dry EDM Milling of Ultra-Fine Surface Finish,” Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, Sept. 23~26, 2008, Tianjin, China. 
  • H. Zheng, Q. Zhang, J.Z. Moore, J. Schwartz, C. McGill,  P.W. McLaughlin, A.J. Shih (2008) “Biopsy Needle Tissue Cutting Analysis,” Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, Sept. 23~26, 2008, Tianjin, China.
  • S. Arul, G. H. Kruger, S.F. Miller, T.Y. Pan, A.J. Shih (2008) ”Spot Friction Weld Strength Improvement Through In-Porcess Metal Matrix Formation,” Proceedings of the 2008 International Manufacturing Science and Engineering Conference, Oct. 7-10, 2008, Evanston, IL. 
  • J.S. Gee, R. E. Dodde, J.D. Geiger, A.J. Shih (2008) “Experimental and Finite Element Analysis of the Thermal-Electric Process in Monopolar Electrosurgical Thermal Management,” Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA08, July 7-9, 2008, Haifa, Israel. 
  • B. Shen, R.E. Dodde, E.C. Johnson, K. Chang, S.F. Miller, J.D. Geiger, A.J. Shih (2007) “Biomedical Manufacturing – Translational Research between Manufacturing and Healthcare,” 2007 International Conference on Advanced Manufacture, SME, Nov. 26-28, Tainan, Taiwan.
  • R.E. Dodde, A. P. Advincula, A. J. Shih (2007) “A Novel Technique for Demonstrating the Real-Time Sub-Surface Tissue Thermal Profile of Two Energized Surgical Instruments,” American Association of Gynecologic Laparoscopists, AAGL 36th Annual Meeting, Nov. 14-17, 2007, Washington, D.C., USA.
  • B. Shen, A. J. Shih, S. Tung (2007) “Application of Nanofluids in minimum quantity Lubrication Grinding,” ASME/STLE International Joint Tribology Conference, Oct 22-24, San Diego, California, USA.
  • J.H. Chang, H. Hocheng, H.Y. Chang, and A.J. Shih, (2007) “Metal Removal Rate of Thiobacillus Thiooxidans without Pre-secreted Metabolite,” Conference Advances of Materials and Processing Technology, Oct 7-11, 2007, Daejeong, Korea. 
  • M.W. Chastagner, S.F. Miller, J.D. Geiger, A.J. Shih (2007) “Tissue Joining Using the Electrosurgical Method,” Proceedings of the 2007 International Manufacturing Science and Engineering Conference MSEC2007, October 15-17, 2007, Atlanta, Georgia, USA. 
  • R.E. Dodde, S.F. Miller, J.D. Geiger, A.J. Shih (2007) “Thermal-Electric Finite Element Analysis of Electrosurgical Cautery Process,” Proceedings of the 2007 International Manufacturing Science and Engineering Conference MSEC2007, October 15-17, 2007, Atlanta, Georgia, USA.
  • C.C. Kao, S.F. Miller, A.J. Shih (2007) “Fuzzy Logic Control System for Micro-Hole Electrical Discharge Machining,” Proceedings of the 2007 International Manufacturing Science and Engineering Conference MSEC2007, October 15-17, 2007, Atlanta, Georgia, USA.
  • T.D. Marusich, S. Usui, J. Ma, D.A. Stephenson, A. J. Shih (2007) ”Finite Element Modeling of Drilling Processes with Solid and Indexable Tooling in Metals and Stack-ups,” 10th CIRP International Workshop on Modeling of Machining Operations, Reggio Calabria, Itlay, Aug. 27-28, 2007.
  • B. Shen, A.J. Shih (2007) “Thermocouple Fixturing Method for Grinding Temperature Measurement,” International Symposium on Advanced Abrasive Technology 2007, Dearborn, MI, Sep. 26-28, 2007. 
  • J. Feng, G.Y. Kim, A.J. Shih, J. Ni (2007) “Investigation of the Micro-end Grinding of Ceramics Using a Sintered Metal-bonded Microgrinding Wheel,” International Symposium on Advanced Abrasive Technology 2007, Dearborn, MI, Sep. 26-28, 2007.
  • J. Tao, A.J. Shih (2007) “Dry and Near-Dry Electrical Discharge Milling Processes,” 15th International International Symposium on Electromachining (ISEM XV), Pittsburgh, Pennsylvania, April 23-27, 2007, pp. 275-280. 
  • C.C. Kao, J. Tao, A.J. Shih (2007) “Water Mist Near Dry Wire and Drilling Electrical Discharge Machining and Gap Distance Modeling,” 15th International International Symposium on Electromachining (ISEM XV), Pittsburgh, Pennsylvania, April 23-27, 2007, pp. 281-286.
  • Z. Huang, A. J. Shih, J. Ni (2007) “Three Dimensional Optical Measurements for Automotive Applications,” International Conference on Competitive Manufacturing COMA’07, February 2007, Stellenbosch University, South Africa.
  • T.D. Marusich, S. Usui, R. Aphale, N. Saini, R. Li, A.J. Shih (2006) “Three-Dimensional Finite Element Modeling of Drilling Processes,” ASME Manufacturing Science and Engineering Conference, Oct. 8-12, Ypsilanti, Michigan. 
  • S.F. Miller, A.J. Shih (2006) “Friction Drilling – A Chipless Hole-Making Process,” ASME Manufacturing Science and Engineering Conference, Oct. 8-12, Ypsilanti, Michigan. 
  • Z. Huang, A.J. Shih, J. Ni (2006) “Laser Interferometry Hologram Registration for Three-Dimensional Precision Measurements,” ASME Manufacturing Science and Engineering Conference, Oct. 8-12, Ypsilanti, Michigan. 
  • A.J. Shih (2006) “Biomedical Manufacturing – A New Frontier of Manufacturing Research,” ASME Manufacturing Science and Engineering Conference, Oct. 8-12, Ypsilanti, Michigan. 
  • J. Tao, C.C. Kao, A.J. Shih (2006) “Near Dry Electrical Discharge Machining,” 7th International Conference on Frontiers of Design and Manufacturing and 7th S. M. Wu Symposium on Manufacturing Sciences, June 21-24, Guangzhou, China.
  • L.M. Xu, A.J. Shih, C.X. Ma, D.J. Hu (2006) “Prediction of Surface Quality for Silicon Carbide Wheel Grinding of Silicon Nitride,” 12th International Manufacturing Conference in China, Sep. 21-23, 2006, Vol. 532-533. 
  • R. Li, A.J. Shih (2006) “High throughput drilling of Ti alloys,” 7th International Conference on Frontiers of Design and Manufacturing and 7th S. M. Wu Symposium on Manufacturing Sciences, June 21-24, Guangzhou, China.
  • Z. Huang, A. J. Shih, J. Ni (2005) “Quantitative Evaluation of Powder Spray Effects on Three-Dimensional Stereovision Measurements of Machined Components,” CIRP-Sponsored 3rd International Conference on Reconfigurable Manufacturing, Ann Arbor, Michigan, May 9-12, 2005.
  • S.F. Miller, J. Qu, E. Shi, C.C. Kao, A.J. Shih (2004) “Investigation of Wire Electrical Discharge Machining of Thin Cross-Sections and Compliant Mechanisms,” ASME IMECE, Anaheim, CA, Nov. 13-19, 2004. 
  • R. Li, A.J. Shih (2004) “Finite Element Modeling of 3D Turning of Titanium,” ASME IMECE, Anaheim, CA, Nov. 13-19, 2004. 
  • J. Kong, A.J. Shih (2004) “Infrared Thermometry for Diesel Exhaust Aftertreatment Filter Temperature Measurement,” 2004 SAE World Congress, March 8-11, Detroit, Michigan.
  • C. W. Hardin, J. Qu, A. J. Shih (2003) “Fixed Abrasive Diamond Wire Saw Slicing of Single Crystal SiC Wafers,” ASME IMECE, Washington, D.C., Nov. 2003. 
  • S. F. Miller, A. J. Shih (2003) “Investigation the Effect of Spark Cycle on the Material Removal Rate in Wire Electrical Discharge Machining,” ASME IMECE, Washington, D.C., Nov. 2003. 
  • J. Kong, M. Bakkal, S. F. Miller, A. J. Shih (2003) “Temperature Measurement in Ceramic Grinding, Machining of Bulk Metallic Glass, and Electrical Discharge Machining,” NSF Workshop on Research Needs in Thermal Aspects of Material Removal Processes, Stillwater, Okalahoma, June 2003.
  • M. G. Garrell, B. M. Ma, E. Lara-Curzio, A. J. Shih, R. O. Scattergood (2002) “Mechanical Properties of Injection Molded Nd-Fe-B Permanent Magnets,” Intermag Europe 2002, April 28 – May 2, 2002, Amsterdam, Netherlands. 
  • J. Qu, A.J. Shih, R.O. Scattergood (2001) “Development of the Cylindrical Wire EDM Process,” Symposium of Nontraditional Manufacturing Research and Applications, 2001 ASME IMECE New York, NY. 
  • A.J. Shih. J.L. Akemon (2001) “Wear of the Blade Diamond Tools in Truing Vitreous Bond Grinding Wheels.  Part I – Wear Measurement and Results,” 2001 Wear of Materials, April 22-26, 2001, Vancouver BC, Canada. 
  • A.J. Shih, W.I. Clark, J.L. Akemon (2001) “Wear of the Blade Diamond Tools in Truing Vitreous Bond Grinding Wheels.  Part II – Truing and Grinding Forces and Wear Mechanism,” 2001 Wear of Materials, April 22-26, 2001, Vancouver BC, Canada.   
  • D.J. Gust, A.J. Shih, M. Tricard, K. Subramanian (1996) “An Approach for Thru-Feed Grinding of Ceramic,” Symposium on Advanced Machining and Finishing Processes for Ceramics, Composites, and High Temperature Alloys, ASME World Congress & Expo., Atlanta, GA. 
  • A.J. Shih (1993) “Finite Element Analysis of the Rake Angle Effects in Orthogonal Metal Cutting,” K. F. Ehmann, Ed., Manufacturing Science and Engineering, ASME PED-Vol. 64, pp. 475-483.
  • A.J. Shih, H.T. Yang S. Chandrasekar (1990) “Experimental and Finite Element Simulation of Metal Cutting Process with Strain Rate and Temperature Effects,” Klamecki, B.E., and K. J. Weinmann, Ed., Fundamental Issues in Machining, ASME PED-Vol. 43, pp. 11-24.
  • K.F. Wang, A.J. Shih, M. Heinstein, H.T. Yang, S. Chandrasekar (1990) “Finite Element Analysis of Heat Treatment, Metal Cutting and Forming,” International Conference on Adv. in Structural Testing, Analysis, and Design, Bangalore, India.
  • W.M. Hwang, A.J. Shih (1985) “Analysis and Optimal Synthesis of Rear Suspension Mechanisms with Single Shock Absorber for Motorcycle,” Proceedings of the 2nd National Conference on Mechanical Engineering, Kaoshiung, Taiwan.
  • A.J. Shih, W.M. Hwang (1985) “A Design for Automatic Manufacture of Self-Tapping Screw Dies,” Proceedings of the 2nd National Conference on Mechanical Engineering, Kaoshiung, Taiwan.

Other Conference Papers:

  • A. J. Shih,J. Z. Moore, C. S. McGill, P. W. McLaughlin, Q. Zhang, H. Zheng (2011) “Biopsy Needle Cutting Edge Rake and Inclination Angles  Modeling of Plane Needles,” 2011 NSF CMMI Research and Innovation Conference, Atlanta, Georgia, Jan 4-7, 2011.
  • B. Tai, S.B. White, D.A. Stephenson, A. J. Shih (2011) “MQL Deep-hole Drilling Workpiece Temperature,” 2011 NSF CMMI Research and Innovation Conference, Atlanta, Georgia, Jan 4-7, 2011.
  • A. J. Shih, R. Dodde, R. Chen, A. Advincula (2011) “A Novel Surgical Thermal Management System in Tissue Machining,” 2011 NSF CMMI Research and Innovation Conference, Atlanta, Georgia, Jan 4-7, 2011.
  • A. J. Shih,C. S. McGill, S.F. Miller, S. Arul, G.H. Kruger (2011) “Localized Metal Matrix Composite Formation on Spot Friction Welding Joint Strength,” 2011 NSF CMMI Research and Innovation Conference, Atlanta, Georgia, Jan 4-7, 2011.
  • A. J. Shih,J. Z. Moore, C. S. McGill, P. W. McLaughlin, Q. Zhang, H. Zheng (2009) “Biopsy Needle Cutting Edge Rake and Inclination Angles  Modeling of Plane Needles,” 2009 NSF CMMI Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009.
  • A. J. Shih, S. Arul, G. H. Kruger, S. F. Miller, T. Y. Pan (2009) “Spot Friction Weld Joint Strength Improvement through Localized Metal Matrix Composite Formation,” 2009 NSF CMMI Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009.
  • J. S. Gee, R. E. Dodde, M. W. Chastagner, K. R. Chen, J. D. Geiger, A. J. Shih (2009) “Surgical Thermal Management System for Tissue Machining,” 2009 NSF CMMI Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009.
  • B. Shen, A. J. Shih, and G. Xiao (2009) “Minimum Quantity Lubrication (MQL) Grinding using Vitrified CBN Wheels,” 2009 NSF CMMI Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009.
  • A. F. Bastawros, A. Chandra, E. Teomete, A.J. Shih (2008) “Analysis of Wire Saw Process Parameters for Cutting of Ductile Materials,” 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN Jan 7-10, 2008.
  • G. H. Kruger, S. F. Miller, S. Arul A. J. Shih, T. I. van Niekerk, D. G. Hattingh (2008) “Process Monitoring and Diagnosis of Spot Friction Welding,” 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN Jan 7-10, 2008.
  • R. E. Dodde, S. F. Miller, J. D. Geiger, A. J. Shih (2008) “Thermal-Electric Finite Element Analysis of Electrosurgical Cautery Surgical Process,” 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN Jan 7-10, 2008.
  • B. Shen, G. Xiao, C. Guo, S. Malkin, A.J. Shih (2008) “Heat Partition in MQL Grinding and Thermocouple Fixation Method for Grinding Temperature Measurement,” 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN Jan 7-10, 2008.
  • S. F. Miller, H.-Y. Kuo, K. Meyer, K. Park, A. J. Shih, J. Ni (2007) “High Performance Machining Research at the S.M. Wu Manufacturing Research Center: A Review,” The Proceedings of OMNI-CNC 2007 Annual Meeting, Nagano, Japan, July 2007. 
  • A.F. Bastawros, A. Chandra, A.J. Shih (2006) “Analysis of Surface Waviness during Wire Saw Cutting of Ductile Materials,” 2006 NSF Design, Service and Manufacturing Grantees and Research Conference, St. Louis, MO, July 24-26, 2006.
  • B. Shen, A.J. Shih, G. Xiao, S. Malkin (2006) “Minimum Quantity Lubrication (MQL) Grinding Using Nanofluids,” 2006 NSF Design, Service and Manufacturing Grantees and Research Conference, St. Louis, MO, July 24-26, 2006.
  • R. Li, J. Qu, A.J. Shih (2005) “Finite Element Modeling of Titanium Machining,” Third Wave Systems User Workshop, Dearborn, Michigan, May 4, 2005.  
  • J.S. Strenkowski, J. Yan, J. Luo, A.J. Shih (2005) “Machining of Elastomers – Finite Element Modeling and Induction Heated Tool,” 2005 NSF Design, Service and Manufacturing Grantees and Research Conference, Scottsdale, AZ, Jan. 3-6, 2005.
  • A.F. Bastawros, A. Chandra, A.J. Shih (2005) “Precision Wire Saw Slicing of Semiconductor Wafers,” 2005 NSF Design, Service and Manufacturing Grantees and Research Conference, Scottsdale, AZ, Jan. 3-6, 2005.
  • R. Li, A.J. Shih (2004) “Finite Element Modeling of Titanium Machining,“ Thirdwave Systems User Conference, Dearborn, MI, May 4, 2004.
  • N. Gallego, A.J. Shih, D. P. Stinton, E. Jih (2004) “Graphite foam for cooling of automotive power electronics,” Carbon 2004 Conference, July 11-16, Providance, RI. 
  • J. Luo, A. J. Shih (2004) “Machining of Elastomers,” 6th International Conference on Frontiers of Design and Manufacturing and 6th S. M. Wu Symposium on Manufacturing Sciences, June 21-23, Xi’an, China.
  • Z. Huang, A. J. Shih, J. Ni (2004) “Reconfigurable 3D Precision Optical Measurements,” 6th International Conference on Frontiers of Design and Manufacturing and 6th S.M. Wu Symposium on Manufacturing Sciences, June 21-23, Xi’an, China.
  • J Qu, P. J. Blau, A. J. Shih, S. B. McSpadden, G. M. Pharr, J. I. Jang (2004)  “Scanning Acoustic Microscopy for Non-Destructive Evaluation of Subsurface Characteristics.” 6th International Conference on Frontiers of Design and Manufacturing and 6th S.M. Wu Symposium on Manufacturing Sciences, June 21-23, Xi’an, China.
  • S.B. White, D.D. Johnson, K. Pipe, N. Gallego, A.J. Shih, D. P. Stinton, E. Jih (2004) “Carbon Foam for Thermal Management of Power Electronics,” 8th IEEE Workshop on Power Electronics in Transportation,” Oct. 21-22, 2004, Detroit, MI. 
  • J. S. Strenkowski, A.J. Shih, J. Luo, J. Yan (2004) “The Use of Induction Heated Tools and Effective Fixture Design for Improving the Machinability of elastomers,” 2004 NSF Design, Service and Manufacturing Grantees and Research Conference, Dallas, TX, Jan. 5-8, 2004.
  • S. F. Miller, B. K. Rhoney, A.J. Shih, S. B. McSpadden (2004) “Electrical Discharge Machining of Metal Bond Diamond Wheels for Precision Gringing,” 2004 NSF Design, Service and Manufacturing Grantees and Research Conference, Dallas, TX, Jan. 5-8, 2004.
  • J. Kong, M. Bakkal, S. F. Miller, A. J. Shih (2003) “Temperature Measurement in Ceramic Grinding, Machining of Bulk Metallic Glass, and Electrical Discharge Machining,” NSF Workshop on Research Needs in Thermal Aspects of Material Removal Processes, Stillwater, Oklahoma, June 2003, pp. 415-424.
  • J. Kong, A.J. Shih, R.O. Scattergood, T.M. Yonushonis, D.J. Gust, M.B. Grant, and S.B. McSpadden (2003) “Cost-Effective Form Grinding of Zirconia using Silicon Carbide Wheels and Ceramic Grinding Temperature Measurement,” 2003 NSF Design, Service and Manufacturing Grantees and Research Conference, Birmingham, Alabama, Jan. 6-9, 2003.
  • J.S. Strenkowski, A.J. Shih, S. Rodkwan, and M.A. Lewis (2003) “Machining of Elastomers – Experimental and Numerical Investigation,” 2003 NSF Design, Service and Manufacturing Grantees and Research Conference, Birmingham, Alabama, Jan. 6-9, 2003.
  • M. G. Garrell, B. M. Ma, E. Lara-Curzio, A. J. Shih, R. O. Scattergood (2002) “Mechanical Properties of Injection Molded Nd-Fe-B Permanent Magnets,” Intermag Europe 2002, April 28 – May 2, 2002, Amsterdam, Netherlands.
  • W. I. Clark, A. J. Shih, R. L. Lemaster, and S. B. McSpadden (2002) “Fixed-Abrasive Diamond Wire Machining,” 2002 NSF Design, Service and Manufacturing Grantees and Research Conference, San Juan, Puerto Rico, Jan. 7-10, 2002.
  • J. S. Strenkowski, A. J. Shih, M. A. Lewis, S. Rodkwan, D. R. Poirier (2002) “Machining of Elastomers,” 2002 NSF Design, Service and Manufacturing Grantees and Research Conference, San Juan, Puerto Rico, Jan. 7-10, 2002.
  • B. K. Rhoney, A. J. Shih, R. O. Scattergood (2002) “Wire EDM Truing of Metal Bond Diamond Wheels for Precision Ceramic Grinding,” 2002 NSF Design, Service and Manufacturing Grantees and Research Conference, San Juan, Puerto Rico, Jan. 7-10, 2002.
  • B. K. Rhoney, A. J. Shih, R. O. Scattergood, J. L. Akemon, D. J. Gust, and M. B. Grant (2001) “Wire EDM Truing of Metal Bond Diamond Wheels,” 2001 ASPE Annual Meeting, Crystal City, VA.
  • J. Qu, A. J. Shih, R. O. Scattergood, and S. B. McSpadden (2001) “Cylindrical Wire Electrical Discharge Machining Process Development,” 2001 ASPE Annual Meeting, Crystal City, VA.
  • A. C. Curry, A. J. Shih, R. O. Scattergood, S. B. McSpadden, and R. B. Dinwiddie (2001) “Infrared Spectrometry for Grinding Temperature Measurement,” 2001 ASPE Annual Meeting, Crystal City, VA.
  • J. Qu, A. J. Shih, and R. O. Scattergood (2001) “Development of the cylindrical wire EDM process,” Symposium of Nontraditional Manufacturing Research and Applications, 2001 ASME IMECE New York, NY.
  • A. J. Shih and J. L. Akemon (2001) “Wear of the Blade Diamond Tools in Truing Vitreous Bond Grinding Wheels.  Part I – Wear Measurement and Results,” 2001 Wear of Materials, April 22-26, 2001, Vancouver BC, Canada.
  • A. J. Shih, W. I. Clark, and J. L. Akemon (2001) “Wear of the Blade Diamond Tools in Truing Vitreous Bond Grinding Wheels.  Part II – Truing and Grinding Forces and Wear Mechanism,” 2001 Wear of Materials, April 22-26, 2001, Vancouver BC, Canada.
  • A.J. Shih, T.M. Yonushonis, M.B. Grant, T.O. Morris and S.B. McSpadden (1998) “High speed and high material removal rate grinding of ceramics using the vitreous bond CBN wheel,” ASPE 13th Annual Meeting, Oct. 25-30, St. Louis, MO.
  • S.B. McSpadden, T.O. Morris and A.J. Shih (1997) “High Speed Cylindrical Grinding of Heavy Duty Diesel Engine Components,” Annual Automotive Technology Development Customers’ Coordination Meeting, Dearborn, MI, Oct. 27-30.
  • A. J. Shih and M. B. Grant (1996) “An Investigation of Truing Parameters for Grinding Zirconia,” Superabrasive Technology 1996, Lawrence Livermore National Lab., November 7—8, Livermore, CA.
  • D.J. Gust, A.J. Shih, M. Tricard and K. Subramanian (1996) “An Approach for Thru-Feed Grinding of Ceramic,” Symposium on Advanced Machining and Finishing Processes for Ceramics, Composites, and High Temperature Alloys, ASME World Congress & Expo., Atlanta, GA.
  • A.J. Shih, D.J. Gust and M.B. Grant (1996) “Precision Grinding of Ceramic Diesel Engine Components,” ASPE Spring Topical Meeting, Annapolis, MD.
  • P. Vishnupad, Y.C. Shin and A.J. Shih (1995) “Monitoring of an Internal Grinding Process,” SME Grinding Conference, Detroit, MI.
  • A.J. Shih (1993) “Finite Element Analysis of the Rake Angle Effects in Orthogonal Metal Cutting,” K. F. Ehmann, Ed., Manufacturing Science and Engineering, ASME PED-Vol. 64, pp. 475-483.
  • A.J. Shih, H.T. Yang and S. Chandrasekar (1990) “Experimental and finite element simulation of metal cutting process with strain rate and temperature effects,” Klamecki, B.E., and K. J. Weinmann, Ed., Fundamental Issues in Machining, ASME PED-Vol. 43, pp. 11-24.
  • K.F. Wang, A.J. Shih, M. Heinstein, H.T. Yang and S. Chandrasekar (1990) “Finite Element Analysis of Heat Treatment, Metal Cutting and Forming,” International Conference on Adv. in Structural Testing, Analysis, and Design, Bangalore, India.
  • W.M. Hwang and A.J. Shih (1985) “Analysis and optimal synthesis of rear suspension mechanisms with single shock absorber for motorcycle,” Proceedings of the 2nd National Conf. on Mechanical Engineering, Kaoshiung, Taiwan.
  • A.J. Shih and W.M. Hwang (1985) “A design for automatic manufacture of self-tapping screw dies,” Proceedings of the 2nd National Conference on Mechanical Engineering, Kaoshiung, Taiwan.